How to Measure Windows for Curtains in Dubai: Step-by-Step Guide

Choosing beautiful curtains is only half the job. If the measurements are wrong, even expensive fabric can look awkward, leave unwanted gaps, or fail to provide the privacy and light control you need.

This is particularly important in Dubai, where apartments and villas often feature floor-to-ceiling windows, wide balcony doors, high ceilings, and large glass panels. Standard curtain sizes do not always suit these dimensions.

Learning how to measure windows for curtains in Dubai helps you choose the right curtain width, length, fullness, and installation position before placing an order.

In this step-by-step guide, we explain how to measure your windows accurately, avoid common mistakes, and decide when made-to-measure curtains are the better option.

Why Accurate Curtain Measurements Matter

Curtain measurements affect more than the appearance of your room. They determine how much fabric you need, where the curtains finish, and whether the window receives adequate coverage.

Incorrect measurements can result in curtains that are too short, insufficient fabric fullness, or gaps that allow sunlight into the room.

Before ordering, consider your window dimensions, ceiling height, curtain heading, track position, and preferred finish.

Our guide to 7 Curtain Mistakes Dubai Homeowners Make explains why measuring only the glass is one of the most common problems.

Tools You Need Before Measuring

Gather these items before starting:

  • A metal measuring tape
  • A pencil and notebook
  • A calculator
  • A step ladder, if necessary
  • A second person to help with wide or tall windows

Measure in centimetres and record every result clearly. Avoid mixing centimetres and inches, as this can lead to ordering mistakes.

For tall windows, use a suitable ladder safely and never lean beyond your reach. If the window is difficult to access, arrange professional measurement instead.

Step 1: Decide Where the Curtains Will Be Installed

Before taking measurements, decide whether the curtains will hang inside the window recess or outside the frame.

Inside the recess: The curtains fit within the recessed window opening. This creates a neat appearance but leaves less room for covering the sides of the window.

Outside the recess: The curtains hang beyond the window frame, often extending toward the ceiling and floor. This is a popular choice for modern Dubai interiors because it can make windows appear larger and provide broader coverage.

For floor-to-ceiling windows and wide balcony doors, an outside-mounted track is often worth considering.

Your installation choice determines which measurements you need.

Step 2: Measure the Window Width

Start by measuring the window from side to side.

For a recessed installation, measure the inside width at the top, middle, and bottom. Window openings are not always perfectly square, so record all three measurements.

For an outside installation, measure the full window frame and note how far the curtain track or rod will extend beyond each side.

Do not automatically use the glass width as your final curtain width.

Curtains usually need additional space so that the fabric can stack beside the window when open and cover the opening when closed.

The required extension depends on the window, available wall space, curtain fullness, and track system.

Step 3: Calculate the Curtain Track or Rod Width

Once you know the window width, decide how wide the installed track or rod should be.

For outside-mounted curtains, the track commonly extends beyond both sides of the window. This helps the open curtains sit away from the glass and allows more daylight into the room.

For example, if your window measures 200 cm wide and you plan to extend the track 20 cm on each side, the total track width would be:

200 + 20 + 20 = 240 cm

This is an illustrative example, not a fixed measurement for every window. Check the available wall space and the curtain system’s requirements before deciding on the extensions.

If you already have a track installed, measure its usable width rather than measuring the window again.

Step 4: Measure the Curtain Drop or Length

The curtain drop is the finished length from the appropriate hanging reference point to the desired bottom edge.

Importantly, measure from where the curtain will actually hang, not automatically from the top of the window frame.

The starting point depends on your curtain heading and hardware.

Choose your preferred finish:

  • Sill length: The curtain finishes around the window sill.
  • Below-sill length: The curtain extends below the sill.
  • Floor length: The curtain finishes just above the floor.
  • Puddle finish: Extra fabric rests on the floor for a decorative effect.

For most modern Dubai living rooms and bedrooms, floor-length curtains create a clean, continuous appearance.

Measure from the track or rod’s specified hanging point to your chosen finish, then check the heading manufacturer’s instructions before finalising the fabric length.

Step 5: Measure Floor-to-Ceiling Windows

Floor-to-ceiling glazing needs particular attention because small measurement errors become noticeable across tall panels.

Measure from the intended track position to the floor at the left, centre, and right sides of the window.

Record the measurements separately rather than assuming the ceiling and floor are perfectly level.

Also check for obstacles such as air-conditioning vents, furniture, skirting boards, and balcony door handles.

For a modern finish, the curtain track can often be installed close to the ceiling, subject to the ceiling construction and available fixing points.

If your home has unusually tall windows, read Custom Curtains vs Ready-Made Curtains in Dubai to understand why made-to-measure sizing may be more practical.

Step 6: Allow for Curtain Fullness

One of the biggest mistakes is ordering fabric that is only as wide as the window or track.

Curtains need extra fabric to create folds. This is called fullness.

As a general planning guide, the total flat fabric width may be around 1.5 to 2 times the track width, depending on the fabric, heading, and desired appearance. Some wave systems and specialist headings require different ratios.

For example, a 240 cm track with a 2-times fullness allowance would require approximately 480 cm of flat fabric width in total.

That does not mean you should order a single 480 cm panel. The finished width must be divided between panels according to the curtain design and supplier’s specifications.

Always confirm the fullness calculation before purchasing fabric or ready-made panels.

Step 7: Consider the Curtain Heading

The heading affects how the curtain hangs and how much fabric it needs.

Wave curtains: Create evenly spaced, flowing folds and suit contemporary interiors.

Eyelet curtains: Hang from a rod through rings built into the fabric. The rod and eyelet dimensions influence the finished drop.

Pinch-pleat curtains: Create a more structured appearance and require fullness appropriate to the pleat design.

Pencil-pleat curtains: Offer adjustable gathering, depending on the tape and installation method.

Choose the heading before finalising your measurements because different styles use different hanging reference points and fabric allowances.

Step 8: Measure for Blackout and Layered Curtains

If you want blackout curtains or a combination of sheers and heavier curtains, plan both layers before ordering.

Blackout curtains need sufficient width and height to cover the window effectively. However, light may still enter around the edges if the curtains do not extend far enough beyond the opening.

For a double-layer installation, confirm that the track can accommodate both layers and that the curtains will move without catching on each other.

For living rooms, Sheer Curtains in Dubai can be paired with heavier curtains to provide flexible daylight and privacy.

Step 9: Record Every Window Separately

Do not assume every window in your home has identical dimensions.

Even windows in the same room can differ slightly because of ceiling levels, recess depth, or installation positions.

Create a measurement list with these details:

  • Room name
  • Window width
  • Track or rod width
  • Track height
  • Finished curtain drop
  • Mounting type
  • Curtain heading
  • Number of panels
  • Single-layer or double-layer design

Label each window clearly, such as “main bedroom,” “living room balcony,” or “guest bedroom.”

This makes it easier to compare quotations and prevents measurements from being assigned to the wrong room.

Step 10: Double-Check Before Ordering

Before purchasing curtains, review every measurement and confirm how the supplier defines finished width and drop.

Some products list the flat width of each panel, while others refer to the total width of a pair. Custom curtain suppliers may calculate fabric requirements according to fullness and heading style.

Check whether the quotation includes tracks, rods, lining, accessories, and installation.

For larger windows, professional measurement can help avoid costly mistakes. It is especially useful when curtains need to fit around recessed ceilings, wide glass doors, or unusual window shapes.

Should You Choose Custom or Ready-Made Curtains?

Ready-made curtains can be suitable for standard windows when available sizes provide enough coverage and the correct finished length.

Custom curtains are often more practical for floor-to-ceiling glazing, extra-wide windows, double-layer systems, and rooms requiring precise light control.

Made-to-measure curtains allow you to specify the fabric, fullness, heading, lining, and final drop according to your windows.

If you are planning your budget, our 2026 Custom Curtains Cost Guide explains how dimensions, fabric, lining, and installation affect the overall price.

Final Thoughts

Measuring windows correctly is the foundation of well-fitted curtains. Start by deciding where the curtains will hang, measure the usable window and track width, calculate the desired drop, and allow enough fabric for attractive folds.

Pay extra attention to floor-to-ceiling windows, blackout coverage, and layered installations because these require more planning than a standard single curtain.

For unusual window dimensions or a professional finish, made-to-measure curtains can save time and help prevent ordering errors.

Dubai Best Curtains provides custom curtains and blinds in Dubai for apartments, villas, bedrooms, living rooms, and large windows, with fabric choices, tailored sizing, and installation options.

Frequently Asked Questions

Should I measure the window or the curtain track?

If a track or rod is already installed, measure its usable width and the correct hanging point. If not, measure the window and plan the track position and side extensions first.

How much wider should curtains be than the window?

It depends on the planned track width, available wall space, and how far the curtains should stack when open. Include suitable extensions on both sides where practical.

How do I measure curtain length?

Measure from the specified hanging point on the rod or track to your chosen endpoint, such as the sill or floor. Account for the heading and hardware.

4. How much fabric fullness do curtains need?

A common starting point is around 1.5 to 2 times the track width, but the correct allowance depends on the heading, fabric, and desired folds.

Should curtains touch the floor?

For a modern look, curtains often finish just above the floor. The exact clearance depends on the track, fabric, floor level, and preferred style.

Should I measure every window separately?

Yes. Small differences in width, height, and mounting position can affect the final fit, even when windows appear identical.

How do I measure floor-to-ceiling windows?

Measure from the intended track position to the floor at several points and check for uneven surfaces or obstacles.

Do blackout curtains need extra width?

They need enough width and length to provide effective coverage. Extra width beyond the window can help reduce gaps, although the result also depends on the installation.

Can I measure curtains myself?

Yes, for straightforward windows. For tall, unusually wide, recessed, or complicated installations, professional measurement can reduce the risk of mistakes.

Are custom curtains better for large Dubai windows?

They are often a good choice because the width, drop, fullness, lining, and heading can be tailored to the actual window dimensions.

Leave a Reply